1.4401 Gegelung dan Jalur Keluli Tahan Karat
Gred Setaraf
| Gred | UNS | MAKAN | JIS | EN | SELEPAS | BS |
|---|---|---|---|---|---|---|
| SS 316 | S31600 | 1.4401 / 1.4436 | SUS 316 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | Z7CND17‐11‐02 | 316S31 / 316S33 |
Spesifikasi Piawai
Lebar: 1000mm / 1120mm / 1250 / 1525mm / 2000mm dll.
Ketebalan: 0.31mm-100mm
Panjang: mengikut keperluan anda
Kemasan Permukaan: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, cermin, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) dll.
Kekerasan: Lembut, Keras, Separuh Keras, Keras Kuarter, Keras Musim Semi dll.
Borang: Gegelung, Jalur dll.
Komposisi kimia
| Piawai | Gred | C | Mn | Cr | Ni | Mo | N |
| EN 10028-7 | 1.4401 | ≤0.07 | ≤2.00 | 16.5-18.5 | 10.0-13.0 | 2.00-2.50 | ≤0.10 |
| EN 10088-2 | 1.4401 | ≤0.07 | ≤2.0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| EN 10088-3 | 1.4401 | ≤0.07 | ≤2.00 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| EN 10088-4 | 1.4401 | ≤0.07 | ≤2.0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0.10 |
| Biasa | 4401 | 0.04 | 17.2 | 10.1 | 2.1 | ||
| ASTM A240 | JENIS 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| ASTM A240 | JENIS 316H | 0.04-0.10 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | |
| ASTM A666 | JENIS 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| IS 6911 | ISS 316 | ≤0.08 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0.10 |
| IS 6911 | ISS 316H | 0.04-0.10 | ≤2.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
Sifat Mekanikal
| Piawai | Gred | Rhlm.2 | Rhlm.0 | Rm | Rockwell | HB |
| MPa | MPa | MPa | ||||
| Jenis produk: Gegelung dan kepingan yang dilancarkan sejuk | ||||||
| ketebalan 1 mm | 300 | 325 | 630 | |||
| ASTM A240 | JENIS 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | JENIS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Jenis produk: Gulungan dan kepingan bergulung panas | ||||||
| Khas (ketebalan 4 mm) | 300 | 350 | 600 | 170 | ||
| ASTM A240 | JENIS 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | JENIS 316H | ≥ 205 | ≥ 515 | ≤ 217 | ||
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Jenis produk: Plat keluli bergolek panas | ||||||
| ketebalan 15 mm | 260 | 300 | 570 | |||
| ASTM A240 | JENIS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| ASTM A240 | JENIS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-2 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-4 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
